Hangers for U-Troughs
Hangers are intermediate support brackets located between screw sections along the length of a screw conveyor. Hangers allow for the use of multiple screw sections. Hangers are generally used when conveying non-abrasive and free-flowing bulk materials. The bulk material must be able to flow around the hanger. Hangers are not recommended when conveying abrasive and sluggish bulk materials.
Choose A Category
Product Filters
A Bore Dimension Min
A Bore Dimension Max
A Screw Diameter
A Screw Diameter
A Shaft Diameter
B Pitch
B Spacing 1st Bolt
B Discharges
B Inlets
Bearing Type
Bolt Size
Shaft Diameter
C Bolt Centers
C Pipe Sch 40 Pipe OD
C Discharges
C Inlets
Screw Diameter
Coupling Diameter
Cover Thickness
D Nominal Bolt Size
D Flight Thickness
D Flight Thickness Inside Root
Discharge Thickness
Drilling
E Dia
E Bolt Diameter
End Bearing Type
G Bolts
H Bolts
Hanger Style
Inside Pipe Diameter
L Std Length
Length
Lock Nut Only
Pipe OD
Pipe Sch 40 Size
Pipe Size Sch 40
C Pipe Sch 40 Pipe OD
Screw Coupling Dia
Screw Coupling Diameter
Screw Diameter
Screw Diameter
Seal Type
Shaft Diameter
Shaft Diameter
Trough Thickness
Trough Type
Weight (lbs)
Weight (lbs/ft)
Weight Each (lbs)
Weight (lbs) w/ HSK
Material
