KWS Manufacturing

Screw Conveyor Feet

Feet provide support for a screw conveyor at each trough connection. Feet are bolted through the trough flanges and then fastened to the floor or structural support. A standard foot will fit U-trough, flared trough and tubular trough housing except for 4”, 6”, 18”, and 20” which are unique for tubular housings. Rectangular troughs require special feet.

Nomenclature

Feet Nomenclature Feet Diagram
Screw Dia. A B C D E F G
Bolts
H
Bolts
Part
Number
Weight
(Lbs.)
4” 5-3/4” 4-5/8” 7-3/8” 3/16” 1-1/2” 7/8” 3/8” 3/8” FT4* 2
6” 8-1/8” 5-5/8” 10” 3/16” 1-1/2” 13/16” 3/8” 3/8” FT6* 3
9” 9-3/8” 7-7/8” 12” 3/16” 2-1/2” 1-5/16” 3/8” 1/2” FT9* 4
12” 12-1/4” 9-5/8” 15” 1/4” 2-1/2” 1-5/8” 1/2” 5/8” FT12* 6
14” 13-1/2” 10-7/8” 16-1/2” 1/4” 2-1/2” 1-3/8” 1/2” 5/8” FT14* 8
16” 14-7/8” 12” 18” 1/4” 3” 1-3/4” 5/8” 5/8” FT16* 10
18” 16” 13-3/8” 19-1/8” 1/4” 3” 1-3/4” 5/8” 5/8” FT18* 11
20” 19-1/4” 15” 22-3/4” 1/4” 3-1/2” 2” 5/8” 3/4” FT20* 15
24” 20” 18-1/8” 24” 1/4” 4” 2-1/4” 5/8” 3/4” FT24* 17
30” 30” 21-1/2” 38” 3/8” 4-1/2” 2-1/2” 5/8” 3/4” FT30 21
36” 36” 24” 44” 1/2” 4-1/2” 2-1/2” 5/8” 3/4” FT36 25

* KWS Stock Component