KWS Manufacturing

Screw Conveyor Saddles

Saddles provide support for a screw conveyor anywhere along the length of the trough. Saddles are welded to the bottom of a trough section at the desired support location and then fastened to the floor or structural support. A standard saddle will fit U-trough, flared trough, and tubular housings. Rectangular troughs require special saddles.

Nomenclature

Saddles Nomenclature Saddles Diagram
Screw Dia. A B C D E F G H
Bolts
Part Number Weight (Lbs.)
4” 5-3/4” 4-5/8” 7-3/8” 3/16” 1-1/2” 7/8” 1-3/8” 3/8” SAD4* 2
6” 8-1/8” 5-5/8” 10” 3/16” 1-1/2” 13/16” 1-3/4” 3/8” SAD6* 3
9” 9-3/8” 7-7/8” 12” 3/16” 2-1/2” 1-5/16” 2” 1/2” SAD9* 4
12” 12-1/4” 9-5/8” 15” 1/4” 2-1/2” 1-3/8” 2-1/4” 5/8” SAD12* 6
14” 13-1/2” 10-7/8” 16-1/2” 1/4” 2-1/2” 1-3/8” 2-3/4” 5/8” SAD14* 8
16” 14-7/8” 12” 18” 1/4” 3” 1-3/4” 2-3/4” 5/8” SAD16* 10
18” 16” 13-3/8” 19-1/8” 1/4” 3” 1-3/4” 2-3/4” 5/8” SAD18* 11
20” 19-1/4” 15” 22-3/4” 1/4” 3-1/2” 2” 2-3/4” 3/4” SAD20* 15
24” 20” 18-1/8” 24” 1/4” 4” 2-1/4” 2-3/4” 3/4” SAD24* 17
30” 30” 21-1/2” 38” 3/8” 4-1/2” 2-1/2” 4” 3/4” SAD30 20
36” 36” 24” 44” 1/2” 4-1/2” 2-1/2” 4” 3/4” SAD36 25

* KWS Stock Component