KWS Manufacturing Company, LLC

Inclined Screw Conveyors Convey and Elevate Bulk Materials for Battery Recycling Facility

General Description

Recycling EV batteries helps the U.S. recover valuable materials, secure domestic supply chains, and reduce waste. Even after a battery no longer meets vehicle performance requirements, the materials inside can be recovered and used to manufacture new batteries.

A leading battery recycling company was expanding its mechanical separation process and needed a reliable way to transfer abrasive material to an existing bagging station. The material stream consisted of a highly variable mixture of fine powders, metal foils, and recycled battery components that created significant dust during handling.

The application presented several challenges. The material was highly abrasive, available space for the equipment was limited, and the required discharge height exceeded the practical span of a small-diameter screw conveyor. The customer required a dependable, long-term solution that could handle the demanding application.

KWS Developed a Stair-Step Arrangement Utilizing Two Inclined Screw Conveyors in Series

KWS Developed a Stair-Step Arrangement Utilizing Two Inclined Screw Conveyors in Series

Design Parameters

  1. Product Type: Battery Scrap
  2. Material Density: 25 to 75 Lbs. per Cubic Foot
  3. Conveyor System Capacity: 6 Cubic Feet per Hour
  4. Duty: Intermittent

KWS Advantages

The customer needed to elevate abrasive inert scrap material on an incline while working within tight space constraints and maintaining clearances with surrounding equipment. Due to the required discharge elevation, a conventional design would have required internal hanger bearings to support the screw. However, the highly abrasive nature of the material would have resulted in rapid hanger bearing wear and increased maintenance. KWS engineers developed an innovative stair-step arrangement utilizing two inclined screw conveyors operating in series. This unique solution achieved the required discharge height, maintained a compact footprint, eliminated internal hanger bearings, and provided reliable, dust-tight operation for long-term performance.

KWS Special Features

Because the material generated significant dust during handling, product containment was a critical requirement. KWS incorporated neoprene gaskets on all bolted connections and air-purged mechanical shaft seals at each end of the conveyors to eliminate dust emissions. ANSI flanged inlet and discharge connections provided secure integration with the customer’s existing equipment and helped maintain a fully enclosed system.

The conveyed material was highly abrasive, requiring a robust conveyor design capable of withstanding continuous service. KWS utilized AR400 abrasion-resistant screw flights welded to heavy-wall Schedule 80 center pipes to maximize durability. The heavy-duty construction minimizes wear, extends equipment life, and provides reliable performance in a demanding application.

Customer Testimonial

“The inclined screw conveyors from KWS work exactly as designed. We were able to utilize our available space and create a completely dust-free system.”

Project Engineer, Battery Recycling Company

Internal Hanger Bearings were Eliminated and Conveyors are Completely Dust-Tight

Internal Hanger Bearings were Eliminated and Conveyors are Completely Dust-Tight

Air-Purged Shaft Seals Eliminate Dust Emissions

Air-Purged Shaft Seals Eliminate Dust Emissions

Battery Scrap

Get Connected

CEMA Standard Components and Complete Engineered Systems

Contact Us Online Resources
KWS Mfg Captain Conveyor

Ask CaptAIn Conveyor An AI Powered Bulk Material Handling Expert

Captain Conveyor

AI Chatbot Disclaimer

CaptAIn Conveyor AI Chat