KWS Manufacturing

Screw Conveyor Inlet Spouts

Inlet spouts are typically located at one end of a screw conveyor on the top of the cover. Bulk materials enter a screw conveyor through the inlet spout. Multiple inlet spouts can be used to feed a screw conveyor. The screw conveyor must be designed for the total volumetric feed rate of all of the inlets combined.

Nomenclature

Inlet Spouts Nomenclature
Screw
Dia.
A B C D E F G H J Part
Number
Weight
(Lbs.)
Inlets Discharges Inlets Discharges Qty. Bolt Dia.
4” 5” 7-1/2” 7-1/2” 3/8” 3/8” 2-1/4” X 2-1/4” 1-1/4” 1/8” 12 1/4” ISF4* 2
6” 7” 10” 10” 11/16” 11/16” 2-13/16” X 3” 1-1/2” 3/16” 12 3/8” ISF6* 5
9” 10” 13” 13-1/4” 1/2” 5/8” 4” X 4” 1-1/2” 3/16” 12 3/8” ISF9* 7
12” 13” 17” 17-1/4” 3/4” 7/8” 5-1/8” X 5-1/4” 2” 3/16” 12 3/8” ISF12* 12
14” 15” 19” 19-1/4” 3/4” 7/8” 3-1/2” 3-1/2” 3-1/2” 2” 3/16” 20 3/8” ISF14* 14
16” 17” 21” 21-1/4” 3/4” 7/8” 3-3/4” 4” 4” 2” 1/4” 20 3/8” ISF16* 15
18” 19” 24” 24-1/4” 1” 1-1/8” 4-7/16” 4-3/8” 4-3/8” 2-1/2” 1/4” 20 1/2” ISF18* 29
20” 21” 26” 26-1/4” 1” 1-1/8” 4-7/8” 4-3/4” 4-3/4” 2-1/2” 1/4” 20 1/2” ISF20* 32
24” 25” 30” 30-1/4” 1” 1-1/8” 5-5/8” 5-5/8” 5-1/2” 2-1/2” 1/4” 20 1/2” ISF24* 37
30” 31” 37” 36-1/4” 1-1/4” 1-3/8” 5-3/4” 5-3/4” 5-3/4” 3” 3/8” 24 1/2” ISF30 62
36” 37” 43” 43-1/4” 1-1/4” 1-3/8” 6-3/4” 6-3/4” 6-3/4” 3” 3/4” 24 1/2” ISF36 73

* KWS Stock Component (Only Includes Fixed Inlets)      Note: Above table gives dimensions for the Discharge Flanges also.

Get Connected

CEMA Standard Components and Complete Engineered Systems

Contact Us Online Resources