Screw Conveyor Hanger Pockets
Hanger pockets allow the use of standard U-trough hangers in tubular housings. Hanger pockets are continuously welded on the top of a tubular housing at each hanger bearing location. A hanger bolts to the sides of the hanger pocket and space is allowed for bearing maintenance and replacement. Standard 216 and 226 style hanger bearings can be used with hanger pockets. A bolted cover seals the hanger pocket.
| Screw Dia. |
Part Number |
A | B | Material Thickness |
Weight (Lbs.) |
|---|---|---|---|---|---|
| 4” | HGP414 HGP412 HGP410 |
12” | 3-3/4” | 14 Ga. 12 Ga. 10 Ga. |
3 5 7 |
| 6” | HGP614 HGP612 HGP610 |
18” | 5” | 14 Ga. 12 Ga. 10 Ga. |
5 7 9 |
| 9” | HGP914 HGP912 HGP910 HGP9316 |
18” | 7-1/8” | 14 Ga. 12 Ga. 10 Ga. 3/16” |
8 10 13 18 |
| 12” | HGP1212 HGP1210 HGP12316 HGP12250 |
24” | 8-7/8” | 12 Ga. 10 Ga. 3/16” 1/4” |
15 20 27 36 |
| 14” | HGP1412 HGP1410 HGP14316 HGP14250 |
20” | 10-1/8” | 12 Ga. 10 Ga. 3/16” 1/4” |
19 24 33 44 |
| 16” | HGP1612 HGP1610 HGP16316 HGP16250 |
24” | 11-1/8” | 12 Ga. 10 Ga. 3/16” 1/4” |
23 30 41 55 |
| Screw Dia. |
Part Number |
A | B | Material Thickness |
Weight (Lbs.) |
|---|---|---|---|---|---|
| 18” | HGP1810 HGP18316 HGP18250 |
26” | 12-3/8” | 10 Ga. 3/16” 1/4” |
37 51 68 |
| 20” | HGP2010 HGP20316 HGP20250 |
26” | 14” | 10 Ga. 3/16” 1/4” |
46 63 84 |
| 24” | HGP2410 HGP24316 HGP24250 |
26” | 17” | 10 Ga. 3/16” 1/4” |
61 83 111 |
| 30” | HGP30250 HGP30375 |
32” | 20” | 1/4” 3/8” |
149 182 |
| 36” | HGP36250 HGP36375 |
34” | 23” | 1/4” 3/8” |
199 235 |
